Description of foam generator TR30
Foam generator is a device for making foam from an aqueous solution containing a certain concentration of foaming agent. Foam generator is a key equipment for the production of foamed cement and foamed concrete, which directly affects the quality and performance of lightweight concrete. Tongrun series foaming machines all use high-pressure air foaming, with fast foaming speed, high efficiency, small foam diameter, small and dense foam, good foam stability, low foam bleeding, and saving foaming agent.
Foam generator TR30 is a small cement foaming machine. It is a kind of special equipment specially used for producing foam in small factories. It is easy to operate and suitable for small factories, universities, colleges, scientific research institutes and medium-sized construction.
Parameters of TR30 foam generator
Maximum foam output（m3/h）
Understand foam quality
The ultimate product of the foaming machine is foam, and what we need in the production process is also foam. Therefore, the quality of the foam is the only criterion for judging the performance of the foaming machine. Judging the foaming quality of the foaming machine should be based on three aspects, namely foam fineness, foam uniformity, and foam bleeding.
Foam fineness refers to the size of the bubble diameter. The smaller the bubble diameter, the smaller and denser the foam, the better the stability of the foam, the higher the strength of the product produced, and the better the insulation performance.
Foam uniformity refers to the uniformity of the bubble diameter. The more uniform the bubble diameter, the narrower the distribution range, the more uniform the stress on the product, and the better the use effect.
Foam bleeding refers to the amount of foaming agent aqueous solution produced after the foam bursts. The lower the foam bleeding, the lower the foam water content, indicating the better the foaming performance of the foaming machine.
Whether the foaming machine can meet the requirements in the above three aspects should be confirmed through a test machine. When choosing a foaming machine, it is required that the foam emitted by the foaming machine must be a sponge-like fine foam with more foam and less water, and it must be uniform and fine.
Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.