Metal Alloy W-Cu Alloys Bar Custom Size Tungsten Copper Alloy Rod | Lemondedudroit

Tungsten Copper Rod is an alloy consisting of tungsten or copper. The copper content is typically between 10% and 25% in common alloys. The alloy is made by powder metalurgists and exhibits good electrical as well thermal conductivity. About Metal Alloy W-Cu Alloys Bar Custom Size Tungsten Copper Alloy Rod: Tungsten Copper Rod is an alloy consisting of copper and/or tungsten. Copper is typically found in 10% to 50% of all commonly used alloys. The powder metallurgy process is what makes the alloy. This allows for good thermal conductivity and high heat resistance, as well as some plasticity. High temperatures such as 3000 °C cause the copper alloy to liquefy, then evaporate, thus absorbing heat and decreasing the material’s temperature. This is why it’s also known as metal sweating material. Tungsten-copper is a combination material that has been refined using static pressing, high heat sintering, copper infiltration, and copper infiltration. The excellent metal characteristics of high quality tungsten powder, as well the plasticity, conductivity, and flexibility of high purity copper powder, are used to produce tungsten copper. You will have high arc breaking and strength. Tungsten/copper alloy serves many purposes. It’s used to create contacts for high-voltage switches that resist arc ablation, rocket throat linings, rudders, and other high temperatures components. Other occasions that call for high thermal and/or electrical conductivity. Resistance Welding Electrodes Resistance welding electrode: Select tungsten copper (WD10080). The combination of copper and tungsten gives it the following characteristics: high temperature resistance; arc ablation resistance; high strength; large specific gravity; good electrical and thermal conductivity. Easy to cut. Also, the product has the ability of cooling and sweating. This is due to its high hardness, high melting temperature and anti-adhesion attributes. It’s often used in projection welding. Spark electrode Use EDM electrode (Witten copper WD10070 and WD10075 are recommended, while discharge tungsten steel should use WD10080). When the mold is made out of tungsten alloy and high temperature superhard alloy, ordinary electrodes will lose a lot of their effectiveness and speed up the process. A high level of processing efficiency, corrosion speed and low losses rate can help improve the accuracy. High Voltage Discharge Tube Electrodes High-voltage Vacuum Discharge Tube Electrode (select #WD10070). The contact material’s temperature will go up by several thousand Celsius during high-voltage vapour discharge tube operation. It is essential that the discharge tube operates in stable conditions because of its thermal conductivity. Technica data for Tungsten Copper Rod 90W/ 10Cu 85W/ 15Cu 80W/ 20Cu 75W/ 25Cu 70W/ 30Cu 60W/ 40Cu 50W/ 50Cu Density 16.75 15.9 15.15 14.5 13.85 13.15 11.85           Item      Surface          Thickness      Width       Length       T       Tolerance      W-Cu Alloy Sheet     Grind    ≥1.5-70        ±0.05      ≤200        ≤500 Payments & Transport:

Metal Alloy W-Cu Alloys Bar Custom Size Tungsten Copper Alloy Rod Properties

Tungsten Copper Alloy Rod N/A W-Cu Molecular Weight N/A Appearance Plate Melting Point N/A Solubility into water N/A Density NA Purity N/A As an expectation Boling mark N/A N/A Heat Conductivity N/A Thermal Expansion N/A Young’s Model N/A Exact N/A Monoisotopic N/A

Metal Alloy W-Cu Alloys Bar Custom Size Tungsten Copper Alloy Rod Health & Safety Information

Safety Warn N/A Hazard Statements N/A Flashing point N/A Hazard Codes N/A Risk Codes N/A Safety Declarations N/A N/A Transport Information N/A Germany N/A
Inquiry us