Boron carbideis an essential special ceramic. It has many great properties. Synthetic diamond is another name for boride. It is non-reactive with acids and alkali solutions and is very easy to produce. It’s widely used for drilling, grinding, and grinding of hard materials. Boron Carbide’s discovery was made in 1858. The hardness of Boron Carbide is superior to that of cubic boron nutride and diamond in nature. Boron carbide B4C Pulp features high melting point (2405), high hardness and low density (2.52g/cm3). With good neutron absorption, low expansion coefficient, thermoelectric and strong acid resistance it’s widely used in the refractory, engineering, and aerospace industries.
Boron Carbide has many shortcomings. It is difficult to use in the industrial sector because of its low fracture toughness, high melting temperature, poor oxidation resistance and poor metal compatibility. It is still in development.
Boron carbide has irritating properties, and long-term contact with it requires some precautions. It is best to avoid direct skin contact and inhalation. Boron Carbide powder will only cause silicosis if the patient inhales very little of it. Silicosis can be reduced if the patient avoids the substance. Inhaling the powder can lead to irritation in your lungs and eventually silicosis.
Boron carbide‘s hardness is less than industrial diamond, but more than silicon carbide. This material is more brittle then most pottery. It has a high thermal energy neutron capture section. It is strong in chemical resistance. Hot hydrogen fluoride, nitric acid and other chemicals do not attack. It is soluble in molten acid, and insoluble when dissolved in water or acid. 2.502.512 = Relative Density (d204). Melting point 2350 . Boiling temperature 3500 Boron Carbide has the ability to absorb many neutrons at once without creating radioisotopes. This makes it an ideal neutron absorber in nuclear power stations. These neutron absorbers control nuclear fission’s rate. Boron Carbide is mostly used to make controllable rods for nuclear reactors. But, sometimes it’s made into powder in order to increase its surface area.
In 1986, the Chernobyl nuclear incident resulted in a transfer of all front-line Russian aviation units to the east. Helicopters from Mi-8 through Mi-26 were put immediately into the airlift mission. . Boron Carbide drops regular sand every time it runs out. The drop makes flying easier. The helicopter had dropped almost 2,000 tonnes of Boron Carbide, sand and engineers announced that there was no more chain reaction in the reactor. In the end, the helicopter weighed in at 5,000 tons. Boron Carbide has been used for years as a grit-abrasive because it is more hard than silicon carbide. Because of its high melting points, Boron Carbide is hard to mold into artificial products. But, by melting the powder at high heat, it can still be made into simpler shapes. It can be used to grind, drill, polish, or grind hard materials, such as precious stones and cemented carbide. Boron Carbide has the potential to be used in a ceramic coating on warships and helicopters. This is a light, resistant coating that can resist penetration by armor-piercing missiles. Gun nozzles can be made from it in the arms sector. Boron Carbide may also be used for the production of metal Borides as well the melting of sodium, boron alloys and special welding.
advanced material Tech Co., Ltd. is an BoronCarbide B4C Pulver supplier. We have over 12 years’ experience in chemical product research and development. You can pay by Credit Card, T/T and Paypal. Trunnano ships goods by FedEx or DHL to overseas customers by air and sea.
Boron Carbide has many shortcomings. It is difficult to use in the industrial sector because of its low fracture toughness, high melting temperature, poor oxidation resistance and poor metal compatibility. It is still in development.
Boron carbide has irritating properties, and long-term contact with it requires some precautions. It is best to avoid direct skin contact and inhalation. Boron Carbide powder will only cause silicosis if the patient inhales very little of it. Silicosis can be reduced if the patient avoids the substance. Inhaling the powder can lead to irritation in your lungs and eventually silicosis.
Boron carbide‘s hardness is less than industrial diamond, but more than silicon carbide. This material is more brittle then most pottery. It has a high thermal energy neutron capture section. It is strong in chemical resistance. Hot hydrogen fluoride, nitric acid and other chemicals do not attack. It is soluble in molten acid, and insoluble when dissolved in water or acid. 2.502.512 = Relative Density (d204). Melting point 2350 . Boiling temperature 3500 Boron Carbide has the ability to absorb many neutrons at once without creating radioisotopes. This makes it an ideal neutron absorber in nuclear power stations. These neutron absorbers control nuclear fission’s rate. Boron Carbide is mostly used to make controllable rods for nuclear reactors. But, sometimes it’s made into powder in order to increase its surface area.
In 1986, the Chernobyl nuclear incident resulted in a transfer of all front-line Russian aviation units to the east. Helicopters from Mi-8 through Mi-26 were put immediately into the airlift mission. . Boron Carbide drops regular sand every time it runs out. The drop makes flying easier. The helicopter had dropped almost 2,000 tonnes of Boron Carbide, sand and engineers announced that there was no more chain reaction in the reactor. In the end, the helicopter weighed in at 5,000 tons. Boron Carbide has been used for years as a grit-abrasive because it is more hard than silicon carbide. Because of its high melting points, Boron Carbide is hard to mold into artificial products. But, by melting the powder at high heat, it can still be made into simpler shapes. It can be used to grind, drill, polish, or grind hard materials, such as precious stones and cemented carbide. Boron Carbide has the potential to be used in a ceramic coating on warships and helicopters. This is a light, resistant coating that can resist penetration by armor-piercing missiles. Gun nozzles can be made from it in the arms sector. Boron Carbide may also be used for the production of metal Borides as well the melting of sodium, boron alloys and special welding.
advanced material Tech Co., Ltd. is an BoronCarbide B4C Pulver supplier. We have over 12 years’ experience in chemical product research and development. You can pay by Credit Card, T/T and Paypal. Trunnano ships goods by FedEx or DHL to overseas customers by air and sea.
Inquiry us