High Purity Stannic Sulfide SnS2 Powder CAS 1314-95-0, 99.99% | Lemondedudroit

Stannic Sulfide SnS2 Pulver:
Tin disulfide You can also call it: stannic sulfide It is an organic compound. Stannic sulfuride formula It is also known as SnS2. It’s a hexagonal yellow flake that has a CdI2 complex crystal structure. It’s difficult to dissolve in water but is easily soluble with aqua regia or hot alkali solutions. Also, it is soluble when dissolved in sodium sulfuride solution. Stannic sulphide This is often used to create gold paint.
Tin(IV) sulfide The crystals are cadmium Iodide precursor crystals. Sn (IV) can be found in an “octahedral porous” with six sulfide centres. The rare mineral montmorillonite is naturally found in the earth, making it a useful semiconductor material.
SnS2 refers to a semiconductor material of n type with hexagonal CdI2 structures. Tin disulfide SnS2 A layered metal dihalide semi-conductor with a crystal and chemical structure very similar to Molybdenum Disulfide (MoS2). Sn is found sandwiched in each layer between two Slayers, one monolayer, and strong covalent bonding Slayers. Every layer will separate when the weak van der Waals force can be overcome through chemical or physical peeling.
SnS2 can exfoliate to form atomic layers sheets like many two-dimensional semiconductors. This is useful in FET and other photovoltaic solar cells as well as sensors and photocatalysts.
Tin disulfide (an acidic sulfide) is water-soluble and can undergo coordination reactions with concentrated hydrochloric Acid. You can mix it with ammonium-sulfide for dissolution.

To receive the most current information, send us an inquiry stannic sulfide price Please fill out the form below if you wish to Stannic Sulfide SnS2 Poultry In bulk.

Stannic Sulfide (CAS 1314-95-0) Description:
Product name: stannic sulfide ; tin sulfide ; stannic sulphide
Stannic Sulfide is a formula : SnS2
Stannic Sulfide color is yellow
Stannic Sulfide particle sizes: -100mesh
Stannic Sulfide purity at 99.99%
Stannic Sulfide Apperance: Yellow Powder
Stannic Sulfide density : 4.5g/cm3
Stannic Sulfide Production Method:
One mol each of high purity tin (high-purity) and two mols of high quality sulfur (low-purity) are vacuum melted at high temperature and pressure. They then melt after further treatment.

Stannic Sulfide analysis

SnS2	Zn	Ag	Cu	Ca	Al	Mg	Ni	Pb	As
99.99%	<=8ppm	<=8ppm	<=2ppm	<=5ppm	<=4ppm	<=6ppm	<=5ppm	<=7ppm	<=4.5ppm

It is simple. Stannic Sulfide SnS2 Poultry produced?
By adding hydrogen sulfuride to an acid solution of Tin Tetrachloride, you can get a yellow-colored tin disulfide precipitate.
Selenium disulfide is also possible by using a solution of tin and sulfide.
Combining tin with sulfur in the presence iodine can produce tin disulfide. This reaction needs heating.
Sn + 2 Sn – SnS2
A second method is to add hydrogen sulfide to the tin salt (IV), or solution of tin salt (IV), and then precipitate.

Stannic Sulfide SnS2 Pulp :
Van der Waals two-dimensional semiconductor material Tin disulfide, (SnS2) exhibits excellent photoelectric property. This material is easy to make, safe for the environment, and non-toxic. Its main uses are in lab research and development as well as experiments. They are also very popular on the marketplace.
Tin disulfide (n-type semiconductor) has a hexagonal CdI2 crystal and a bandgap around 2.35 eV. The wide bandgap allows it to have excellent optical and electrical properties.
Tin disulfide, which has an absorption coefficient of high value and a bandgap that is similar to silicon is well-suited for use as an absorber layer in solar cells. This has made it a popular research area for foreign and domestic experts over the past few years. This metal can be used in manufacturing, imitation gold plating, and other purposes. Paints and many other uses.
You can use single crystals of tin disulfide to make single-layer SnS2 or few-layer SnS2 using liquid stripping, mechanically, and/or chemically.
Tin disulfide is suitable for liquid chemical extraction to produce SnS2 Nanosheets and Nanoparticles.
Tin disulfide exhibits high surface activity and sensitivity. SnS2 exfoliated single-layer and multi-layer ultra thin films made from bulk crystals or powder have been used in light-emitters, field effect transistors (FET), sensors for gas, and photodetectors. Thermoelectric photovoltaic as well as other energy storage devices, like the use of lithium-ionbatteries.

Stannic Sulfide SnS2 Pulver Storage Conditions:
SnS2 powder performance and usage effects can be affected by damp reunion. Stannic Sulfide SnS2 Puffer should therefore be vacuum packed and kept dry. Stannic Sulfide SnS2 Puffer must not be exposed to any air. SnS2 powder must be kept away from stress.

Shipping Stannic Sulfide powder:
There are many options for packing, which depend on the Stannic Sulfide SnS2 Pulver quantity.
Stannic Sulfide SnS2 Pulp packing:vacuum packed, 100g to 500g or one kg/bag at 25kg/barrel. Or as you request.
Stannic Sulfide SnS2 Pulp Powder shipping: could be shipped by sea or by air?as soon after payment receipt.


Luoyang Tongrun Nano Technology Co. Ltd.
High-quality products are what you want Stanic Sulfide Powder Please feel free and contact us to send us an inquiry. (brad@ihpa.net)