High Purity Bismuth Bi powder cas 7440-69-9, 99% | Cie-China

About Bismuth Bi powder:

Bismuth when fresh produced is a silvery crystalline and brittle metal that often gives off a pinkish hue in the atmosphere. Bismuth is the most diamagnetic metal, with a thermal conductivity that is lower than mercury. It is very resistant to electrical current and has the highest Hall coefficient.

Bismuth dust is an spherical type of metal nanoparticle. It comes in colors ranging from dark gray to black, depending on its size.

It exhibits a very high electrical resistance. Also, it has the highest Hall effect among metals. This is when there is an increase in the electrical resistance in magnetic fields. Bismuth can be dissolved in concentrated nitric oxygen, and is therefore stable to both water and oxygen. Bismuth salts all form insoluble compounds when they are added to water.

Bismuth powder on sale:

Trusted Bismuth Metal Powder Supplier. If you are interested in buying Bismuth powder bulk, please send us an inquiry.

Bismuthimite, bismite, and cobalt are the two most important bismuth ores. Bismuth can occur naturally in the metal and as crystals within the sulfides minerals of cobalt silver, nickel and silver. Bismuth is most commonly produced by lead and copper melting, particularly in the USA. Bolivia, Peru, Mexico (and Canada) are the main areas that it’s mined. But, only 3.000 tonnes of this metal is produced annually. It is impossible to know how much bismuth there is, though it appears unlikely that this metal will run out.

Bismuth bi powder specifications:

Bismuth powder Purity: 99.5%

Bismuth powder CAS:7440-69-9

Bismuth powder EINECS: 231-177-4

Bismuth powder APS 80 nm, or upon request

Bismuth powder SSA: 1>7 m

²

/g

Bismuth powder Morphology: spherical

Bismuth powder melting point: 271degC

Bismuth powder Boiling point 1 420 – 1560°C

How is Bismuth Bi-Powder made ?

For bismuth powder production, it is better to use freshly prepared A-Bi2O3. To do this, reduce the solution with a mix of molecular and atomic hydrogen at 220C. A reduction reaction between a-Bi2O3 and a-3-Bi took place, without the formation any intermediate phase.

Bismuth can also be produced using such methods as mechanical comminution and electrolysis at high current densities of nitrate or sulfate solutions, the electrolysis and reduction in A1Cl3 and glacial alcohol of BiCl3, and reduction in Aqueous Solutions of Bismuth Salts with different agents.

Bismuth powder Uses:

Bismuth Powder is for the preparation of bonded sputtering targets. It can also be used in Chemical Vapor Deposition(CVD), Physical Vapor Deposition(PVD), Low-Temperature Organic Evaporation and Atomic Layer Deposition. High-surface area powders can also be used in applications such as water treatment, fuel cell or solar applications.

Bismuth material is used to make low melting solders, fusible alloys and bird shot as well low-toxicity fishing sinkers. Bismuth compounds may also be used to make pharmaceuticals. Industry uses bismuth compounds to create catalysts when producing acrylonitrile. It is used as the base material for rubbers and synthetic fibers.

Bismuth dust can also be used to lubricate the surface. By adding 0.1- 0.3% of bi nanoparticles to the grease, it will make a selflubricating, self laminating layer to protect and improve the performance.

Bismuth dust may be used in the metalurgical industry. They can be added to cast iron, steel, and aluminum alloys, which will improve its cutting performance.

Bismuth dustcan serve as magnet materials. The thermal neutron absorb cross-section of bismuth is smaller, the melting point is lower, and boiling point are higher, making it a good heat transfer medium for a nuclear reactor.

Bismuth Powder Storage Conditions:

A damp reunion could affect Bi powder’s dispersion and use performance. Bismuth Bi should be stored in vacuum bags and kept dry. Bismuth Bi must not be exposed to the air. Additionally, it is important to avoid stressing the Bi powder.

Packing & Shipping Bismuth Bi-Powder:

There are many options for packaging, which depend on the Bismuth Bi Powder quantity.

Bismuth Bi powder packaging:vacuum packed, 100g to 500g, 1kg/bag or 25kg/barrel. Or as requested.

Bismuth Bi-powder shipping: can be shipped by sea or air as soon after receipt of payment.

Technology Co. Ltd. (), is a global trusted supplier and manufacturer of chemical material. It has over 12-years experience in producing super high quality chemicals and nanomaterials. This includes boride powders, nitride pulverizes, graphite powders, sulfide powders, 3D printing powders, etc.

We can provide high-quality bismuth powder. Please contact us to inquire. (brad@ihpa.net)