Skip to content

High Purity Aluminum Silicide AlSi2 Powder, 99% |

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Aluminum silicide also goes by the name aluminum disilicide. Its chemical formula is AlSi2. AlSi2 is also used in powder metallurgy and as brazing solder. Purity: 99%
Particle Size: 5-10um
Aluminum Silicide AlSi2 Pulver:
Alloys of aluminum and silicon Aluminium-silicon alloy is an alloy made by forging or casting aluminum with silicon as its major components. A general rule of thumb is that 11% silicon is used. A small amount of copper or iron is also added for strength. The density is approximately 2.62.7. It is around 2.62.7 g/cm3. The thermal conductivity of the material is 101126W/(m*), Young’s modulus 71.0GPa. Impact value 78.5J. Fatigue limit +-45MPa.
Because of its light weight, high thermal conductivity, certain strength and hardness as well as corrosion resistance AI-Si Alloys These are commonly used in automotive manufacturing and machine building to create parts that can be used under sliding friction conditions.

The aluminum-silicon alloy It forms a binary phase in 11.7% silicon, with a melting point at 577degC. Both phases can be described as silicon solid solutions of aluminum and silicon solid solutions of aluminum at room temperature. Intermetallic compounds do not exist. You can add sodium in very small amounts to increase strength, eutectic, and harden the dispersion. Although iron is not a very good choice, it can significantly reduce toughness. However, manganese may be used to mitigate this.

Al-Si alloy This is an industrial metal that’s very valuable. Aluminium silicide This metal is extensively used in the construction of automobiles, aircraft, transport, and other major industries. This is used for making low- or medium-strength castings of complex shapes like brackets and motor housings. Brazing solder is also made from racks. It is a typical eutectic alloy with a simplified phase diagram. No intermediate compounds are made. This alloy offers high casting performance, low cost and good specific strength. It is an element in the third group of elements, with silicon being a semiconductor element. The difference between them is small.

To receive the latest information, send us an inquiry aluminum disilicide price You can buy here Aluminum silicicide AlSi2 Powder In bulk.

The Product Performance of AlSi2 Aluminum Silicide Powder
Aluminum silicide AlSi2 (powder) is an alloy from silicon and aluminium. The aluminum silicide, which is often in the form powder, is used to make powder metallurgy. Aluminum silicide is formed at high temperatures into a liquid and then pressed into different products.

Technical Parameters of AlSi2 Powder Aluminum Silicide:
Name of the product MF Purity Particle size Melting Point Density The color of the sky
Silicide of aluminum AlSi2 99% 5-10um 1400 2.7g/cm3 gray-black
Chemical composition of AlSi2 Powder Aluminum Silicide:
AlSi2 Al Si Fe Ca S P C
99% 70% Balance 0.2% 0.1% 0.02% 0.05% 0.02%

It is simple. Powder Aluminum Silicide AlSi2 produced?
An electrothermal process for making aluminum-silicon alloy is at around 2000°C. Alumina and silicon oxide, which are liquids during the metallurgical processes, are reduced by a carbonaceous agent. The maximum temperature the submerged arcane can achieve is usually about 1350°C to about 2200degC.

Applicaciones Aluminum Silicide AlSi2 (Powder)
The ductility of an aluminum-silicon alloy is best when it has a low silicon content (such 0.7). It is also more malleable and can be used in deformed forms. But, when it has a higher silicon content (such 7%), it fills the melt better and is frequently used to create Cast alloy.

When the aluminum-silicon alloys have a higher silicon content than the Al-Si equilibrium point (12.6%), adding some Ni, Cu, or Mg can enhance its complete mechanical properties.

These can be replaced by cast iron cylinders for a significant weight reduction. You can electrochemically treat the aluminum-silicon cylinder to remove the surface aluminum, retain primary silicon dots embedded within the substrate of the cylinder and improve its wear and scratch resistance.

Due to its low weight and corrosion resistance, an alloy with between 11%-13% silicon content is one of the top piston materials.
1). Powder metallurgy materials made of aluminum silicide, AlSi2 (powder) are used. The silica at high temperatures is able to form into a molten state, which can then be pressed into many different products.
2). AlSi2 aluminum silica powder is used for the production of weak castings in complex shapes, like bracket, motor shell and cover.
3). As brazing solder, AlSi2 silicide AlSi2 is used.

Shipping and Packing of Aluminum Silicide AlSi2 Pulver:
We offer many packing options that are dependent on the amount of aluminum silicide AlSi2 in our powder.
Powder packaging of aluminum silicide, AlSi2 You can vacuum pack 1kg per bag, 25kg/barrel or according to your requirements.
Aluminium silicicide AlSi2 powder shipment: Could be sent by air, sea or express once payment has been received.


Technology Co. Ltd. (), is a trusted supplier of global chemicals and manufacturers with more than 12 years experience. This includes super high-quality chemicals, nanomaterials, nitride or graphite powders, as well as 3D printing powders.
High-quality products are what you want Al Si2 Pulver Please feel free and contact us to send an enquiry. (brad@ihpa.net)

Aluminium Silicide AlSi2 powder Properties

Other Titles Aluminium silicon alloy, AlSi2 powder
11145-27-0
Compound Formula AlSi2
Molecular Weight N/A
Appearance Solid
Melting Point 600-760 degC
Solubility In Water Insoluble
Density 2.7 g/cm3
Purity 99.00%
Size 5-10 um
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young’s Module N/A
Exact Size N/A
Monoisotopic 54.958 g/mol

Safety & Health Information

Safety Notice N/A
Hazard Statements N/A
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information NONH on all transport modes
WGK Germany N/A

Inquiry us