In recent years, many fireplace injuries are related to roof materials, including warmth preservation and waterproof.
Some roof materials are very flammable. Therefore, humans will switch interest to a substitute good - foaming concrete,it makes an extraordinary contribution to residence insulation and energy -saving.The subsequent is the development system of foamed concrete in roofing.
1.Clean the energy-saving roof compound earlier before application
The dust and impurities from the roof ought to be discard,which making sure that the roof is smooth. In the course of the subsequent laying system, the integrity and tightness of the roof can be properly completed, so that it is able to facilitate warmth upkeep and insulation of the indoors of the residence.If the residence floor is observed to be choppy for the duration of cleaning, it's far important to fill the holes with cement in time,in this way ,the whole roof is easy, which is the first requirement of foam concrete application.
2.Locate the slope direction and slope of the roof
The important thing of the development is to discover the slope course and slope of the roof.When the use of foamed concrete, we must observe the course of drainage of the residence, so it's very crucial to identify the slope route of the roof.As a whole, it's vital to know the thickness of roof slope, so that the thickness of the materials may be appropriately recognised while qualifying foamed concrete materials, and the cement and concrete may be beaten more as it should be, reducing the waste and loss of materials.
3.Make foamed concrete substance
During the course of the system of making foamed concrete substances, it's miles important to grasp many fundamental factors. To start with, the foaming agent and a fixed amount of water is required to be poured into a special mixer, and the mixture is essential to be sufficiently combined to shape foam crystals for next operation.Then switch to the foamed concrete mixer, put a certain quantity of cement, sand and thick gauge and add some important external auxiliary marketers, make these materials completely stir and shake well, so that the foamed concrete material is ready to be used.It must employ special transported equipment to transport the foamed concrete substance to prevent it from being scattered everywhere in the location.in the course of the laying of foamed concrete substances, it's extremely necessary to pour homogenate into the concrete and stir it completely at the same time, avoiding huge areas of condensation into blocks.The paving floor is flush and tidy and the uniformity of foamed concrete.
4.Preservation should be carried out after manufacture
After pouring the foamed concrete substance into the constructing composite layer, the protection need to be achieved in time to prevent the natural oxidation of the material.As soon as the development is finished, the surface of foamed concrete will be watered to save the material from cracking because of water shortage, causing cracks in the insulation layer of the residence.It is liable to carry air into the residence,which is detrimental to the insulation of the house.